Dual-channel output battery charger/simulator, 500mA (2306-PJ)

Maximum voltage 15V, maximum current 5A, GPIB interface

Ultra-fast response transient load current

Variable output resistance

Pulse peak, average and baseline load current measurement

100nA DC current sensitivity

Current level measurement capability

Receives up to 3A

Open sense lead detection

Built-in digital voltmeter

The R&S®SMB100M offers excellent RF characteristics that make it an excellent general purpose instrument. These outstanding RF characteristics combined with the compact size and low weight make the instrument ideal for a wide range of applications. the R&S®SMB100M is best suited for development, production and service, or more simply put: wherever analog RF signals are required.

Its wide frequency range covers a large number of critical RF applications. The R&S®SMB100M is ideal for critical ISM applications in the frequency band up to 5.7 GHz as well as EMC applications because of its lower frequency limit of 9 kHz. in addition, the R&S®SMB100M can be ideally used to measure blocking characteristics up to 12.75 GHz CW frequencies, as specified in various telecom standards. When it comes to frequent changes in level settings, this is the first time that a wear-free and tear-free electronic step attenuator has been used for this frequency range. In addition to pure CW signals, the R&S®SMB100M also offers the most common analog AM and FM / φM modulation modes as standard.

The R&S®SMB100M with its comprehensive range of standard equipment and requires virtually no other options.

The R&S CMW500 Broadband Radio Communications Tester is a versatile test platform for RF integration and protocol development. The tester can be used as both an R&S CMW500 connectivity platform and an R&S CMW500 protocol tester.The R&S CMW500 includes a fully integrated end-to-end data solution that supports comprehensive IP throughput and quality measurements. The R&S CMW500 can be used in all phases of product development, production, and maintenance. And it supports all common cellular and non-cellular wireless technologies. This solution supports a wide range of technologies.

The R&S CMW100 communications manufacturing test set is built on the R&S CMW platform. The flexible RF interface supports the simultaneous testing of up to eight devices. the remote control and measurement concept of the R&S CMW100 is compatible with the R&S CMW500. the R&S CMW100 is optimized and cost-efficient for the calibration and verification of wireless devices in non-signaling mode (analyzer/generator). The tester features a new eco-friendly hardware concept with a compact size and very low power consumption, making it ideal for fully automated robotic production lines. The tester supports LTE, 5G NR, WLAN, Bluetooth and IoT technologies to meet today's and future requirements.

9 kHz to 20 GHz
With enhanced TDR measurement option
123 dB dynamic range maintained at test port
Scan speed: 9.6 microseconds per point
Trace noise: 0.003 dB rms (70 kHz IFBW)
Number of built-in ports 2 or 4 ports
Output power 10 dBm
Fixture insertion/reverse insertion and port characteristic impedance conversion
Frequency bias mode for inverter devices
Built-in Visual Basic for Applications (VBA)

Compact form factor while providing advanced measurement capabilitiesThe E5061B can meet the measurement needs of a wide range of electronic components and circuits from low to high frequencies. The E5061B is ideal for use in wireless communications, aerospace and defense, computer, medical, automotive, CATV, and other industries.

With a wide selection of tester options, you can find the configuration that best suits your test needs: 100 kHz to 1.5 GHz/3 GHz, 2-port, 50 or 75 Ω, transmission/reflection or S-parameter tester

Measurements in the 5 Hz to 500 MHz/1.5 GHz/3 GHz frequency range with the option LF-RF NA

Combines network analysis and impedance analysis in a single instrument that can be custom configured for your application needs (options 3L5/3L4/3L3 and 005)

Channel: 1

Maximum current source/range: 3A

Maximum voltage source / range: 60V

Measurement resolution (current / voltage): 10pA / 100nV

Power supply power: 60W

6½ bit resolution

10 measurement functions: DC/AC voltage, DC/AC current, 2-wire and 4-wire resistance, diode, on/off, frequency, period

Basic accuracy: 0.0035% DC, 0.06% AC

1000 V maximum input voltage, 3 A maximum input current

The ESA-E series is a medium-performance spectrum analyzer solution that is future-proof. The series sets the performance standard for similarly priced products in terms of measurement speed, dynamic range, accuracy, and power resolution. Its flexible platform design allows R&D, manufacturing and field service engineers to customize the product to meet specific test requirements and upgrade it with new features when needed. The product features a single-button measurement solution with an easy-to-navigate user interface and high-speed measurement performance, allowing engineers to spend less time testing and more time designing, building, and troubleshooting components and products.

IQxstream-5G 5G FR1 Sub-6 GHz Cellular Tester

The IQxstream-5G™ is a compact multi-DUT manufacturing test solution with 200 MHz continuous bandwidth for physical layer testing in the 5G NR Sub-6 GHz frequency range.

This high-performance, comprehensive non-signaling tester is ideally suited for 5G user equipment (UE) and small cell testing across multiple cellular technologies including 2G, 3G, 4G and 5G.

HIOKI LCR Tester High-speed LCR meter with sampling rate up to 120MHz

• Wide frequency band from 100kHz to 120MHz
• High-speed LCR testing (6ms/sampling)
• Removable preamplifier optional
• Load compensation function" to provide compensation for comparison standard components

The LCR tester 3535 amplifier unit (9700-10) is a factory line option, and is a fixed option when ordering. (The LCR tester 3535 input probe/test fixture is not supplied with the unit. Different probe/test fixture options are available for different models depending on the measurement purpose